183+ Ender 5 Pro Y Axis

183+ Ender 5 Pro Y Axis. I am using skr 1.4 turbo with tmc2130 and my current y axis vref is 0.75v. 26.04.2021 · service tutorial ender 5 pro y axis synchronous belt replacement

Uitgelicht Ender 5 Dual Z 3d Models To Print Yeggi

And also had no problems. I am going through solutions for a y axis layer shift on my prints and the only one left is adjusting the vref. Can good people of reddit please advise what is their vref setting for the y axis stepper driver?

I am going through solutions for a y axis layer shift on my prints and the only one left is adjusting the vref.

I believe the axis may be inverted? When printing elements with about 4cm in the y axis i get a layer shifting. What i have done so far: Brand new ender 5 plus ive been working on tracking down the cause of this noise for 2 weeks with support. 01.07.2020 · i am completely new to 3d printing. Since 3 weeks i have installed the silent board v4.2.7. I am using skr 1.4 turbo with tmc2130 and my current y axis vref is 0.75v. 06.09.2021 · i have had an ender 5 for about 2 months, i have had no problems with it so far.

I just received my first 3d printer, the ender 5... . 06.09.2021 · i have had an ender 5 for about 2 months, i have had no problems with it so far.

The higher the layer, the more it moves to the back... 26.04.2021 · service tutorial ender 5 pro y axis synchronous belt replacement What i have done so far: 0).i thought this should be no problem but after turning the printer on again the info screen showed the axis as 0, 0, 0 again. The manual says it should auto home to the left front, but instead it moves to the rear right. I did shutdown the printer without the axis being in home position (x: I just received my first 3d printer, the ender 5.

The manual says it should auto home to the left front, but instead it moves to the rear right. I believe the axis may be inverted? And also had no problems. Since 3 weeks i have installed the silent board v4.2.7. I got my first printer a creality ender 5 pro yesterday. I did shutdown the printer without the axis being in home position (x: 0).i thought this should be no problem but after turning the printer on again the info screen showed the axis as 0, 0, 0 again.

Posted by 1 year ago. The manual says it should auto home to the left front, but instead it moves to the rear right. What i have done so far: 06.09.2021 · i have had an ender 5 for about 2 months, i have had no problems with it so far. Standard (normal position) +5mm (for those who. Ender 5 what is your y axis vref? I believe the axis may be inverted? When printing elements with about 4cm in the y axis i get a layer shifting. And also had no problems. I just received my first 3d printer, the ender 5.. 26.04.2021 · service tutorial ender 5 pro y axis synchronous belt replacement

Brand new ender 5 plus ive been working on tracking down the cause of this noise for 2 weeks with support. I got my first printer a creality ender 5 pro yesterday. What i have done so far: Ender 5 what is your y axis vref? When printing elements with about 4cm in the y axis i get a layer shifting. I believe the axis may be inverted? Posted by 1 year ago. I am going through solutions for a y axis layer shift on my prints and the only one left is adjusting the vref. The higher the layer, the more it moves to the back.

The higher the layer, the more it moves to the back... Standard (normal position) +5mm (for those who. 0).i thought this should be no problem but after turning the printer on again the info screen showed the axis as 0, 0, 0 again... Brand new ender 5 plus ive been working on tracking down the cause of this noise for 2 weeks with support.

And also had no problems... Can good people of reddit please advise what is their vref setting for the y axis stepper driver?. I just received my first 3d printer, the ender 5.

The higher the layer, the more it moves to the back. The manual says it should auto home to the left front, but instead it moves to the rear right. I believe the axis may be inverted? I just received my first 3d printer, the ender 5. Standard (normal position) +5mm (for those who. I did shutdown the printer without the axis being in home position (x: What i have done so far: 01.07.2020 · i am completely new to 3d printing. Posted by 1 year ago. And also had no problems. Ender 5 what is your y axis vref?.. Standard (normal position) +5mm (for those who.

Ender 5 what is your y axis vref?.. 01.07.2020 · i am completely new to 3d printing. What i have done so far: Standard (normal position) +5mm (for those who. I did shutdown the printer without the axis being in home position (x: The higher the layer, the more it moves to the back... What i have done so far:

01.07.2020 · i am completely new to 3d printing... When printing elements with about 4cm in the y axis i get a layer shifting. Brand new ender 5 plus ive been working on tracking down the cause of this noise for 2 weeks with support. I got my first printer a creality ender 5 pro yesterday. Since 3 weeks i have installed the silent board v4.2.7. What i have done so far:. The higher the layer, the more it moves to the back.

0).i thought this should be no problem but after turning the printer on again the info screen showed the axis as 0, 0, 0 again.. Brand new ender 5 plus ive been working on tracking down the cause of this noise for 2 weeks with support.. 01.07.2020 · i am completely new to 3d printing.

0).i thought this should be no problem but after turning the printer on again the info screen showed the axis as 0, 0, 0 again... Brand new ender 5 plus ive been working on tracking down the cause of this noise for 2 weeks with support. The higher the layer, the more it moves to the back. And also had no problems. I am going through solutions for a y axis layer shift on my prints and the only one left is adjusting the vref. Standard (normal position) +5mm (for those who. I am using skr 1.4 turbo with tmc2130 and my current y axis vref is 0.75v. I believe the axis may be inverted? Ender 5 what is your y axis vref?. Ender 5 what is your y axis vref?

Ender 5 what is your y axis vref? I am going through solutions for a y axis layer shift on my prints and the only one left is adjusting the vref. I did shutdown the printer without the axis being in home position (x: I am using skr 1.4 turbo with tmc2130 and my current y axis vref is 0.75v.

I believe the axis may be inverted?. 01.07.2020 · i am completely new to 3d printing. I am going through solutions for a y axis layer shift on my prints and the only one left is adjusting the vref. I am using skr 1.4 turbo with tmc2130 and my current y axis vref is 0.75v. Standard (normal position) +5mm (for those who. 0).i thought this should be no problem but after turning the printer on again the info screen showed the axis as 0, 0, 0 again. Brand new ender 5 plus ive been working on tracking down the cause of this noise for 2 weeks with support. I believe the axis may be inverted? Standard (normal position) +5mm (for those who.

Ender 5 what is your y axis vref?. And also had no problems. 0).i thought this should be no problem but after turning the printer on again the info screen showed the axis as 0, 0, 0 again. I believe the axis may be inverted? The higher the layer, the more it moves to the back. Standard (normal position) +5mm (for those who. The manual says it should auto home to the left front, but instead it moves to the rear right. I am using skr 1.4 turbo with tmc2130 and my current y axis vref is 0.75v. Can good people of reddit please advise what is their vref setting for the y axis stepper driver?

I believe the axis may be inverted?.. I am going through solutions for a y axis layer shift on my prints and the only one left is adjusting the vref. I did shutdown the printer without the axis being in home position (x: Posted by 1 year ago. Ender 5 what is your y axis vref? I got my first printer a creality ender 5 pro yesterday. I just received my first 3d printer, the ender 5. 26.04.2021 · service tutorial ender 5 pro y axis synchronous belt replacement I am using skr 1.4 turbo with tmc2130 and my current y axis vref is 0.75v. Since 3 weeks i have installed the silent board v4.2.7. 01.07.2020 · i am completely new to 3d printing.

06.09.2021 · i have had an ender 5 for about 2 months, i have had no problems with it so far... I got my first printer a creality ender 5 pro yesterday. I just received my first 3d printer, the ender 5. Posted by 1 year ago. 26.04.2021 · service tutorial ender 5 pro y axis synchronous belt replacement Ender 5 what is your y axis vref? The higher the layer, the more it moves to the back. I did shutdown the printer without the axis being in home position (x: I believe the axis may be inverted? The manual says it should auto home to the left front, but instead it moves to the rear right. 06.09.2021 · i have had an ender 5 for about 2 months, i have had no problems with it so far... The higher the layer, the more it moves to the back.

The higher the layer, the more it moves to the back. Brand new ender 5 plus ive been working on tracking down the cause of this noise for 2 weeks with support. Standard (normal position) +5mm (for those who. What i have done so far:

Can good people of reddit please advise what is their vref setting for the y axis stepper driver?. I got my first printer a creality ender 5 pro yesterday. 01.07.2020 · i am completely new to 3d printing. I believe the axis may be inverted? And also had no problems. I am using skr 1.4 turbo with tmc2130 and my current y axis vref is 0.75v. 06.09.2021 · i have had an ender 5 for about 2 months, i have had no problems with it so far. 26.04.2021 · service tutorial ender 5 pro y axis synchronous belt replacement

And also had no problems.. What i have done so far: 0).i thought this should be no problem but after turning the printer on again the info screen showed the axis as 0, 0, 0 again. Standard (normal position) +5mm (for those who. I believe the axis may be inverted? I am using skr 1.4 turbo with tmc2130 and my current y axis vref is 0.75v. When printing elements with about 4cm in the y axis i get a layer shifting. I did shutdown the printer without the axis being in home position (x: The manual says it should auto home to the left front, but instead it moves to the rear right. 26.04.2021 · service tutorial ender 5 pro y axis synchronous belt replacement Posted by 1 year ago.. Ender 5 what is your y axis vref?

Since 3 weeks i have installed the silent board v4.2.7.. Standard (normal position) +5mm (for those who. And also had no problems. 01.07.2020 · i am completely new to 3d printing. I got my first printer a creality ender 5 pro yesterday. I believe the axis may be inverted?.. I believe the axis may be inverted?

Since 3 weeks i have installed the silent board v4.2.7. The manual says it should auto home to the left front, but instead it moves to the rear right. I did shutdown the printer without the axis being in home position (x: I got my first printer a creality ender 5 pro yesterday. 06.09.2021 · i have had an ender 5 for about 2 months, i have had no problems with it so far. I believe the axis may be inverted? 0).i thought this should be no problem but after turning the printer on again the info screen showed the axis as 0, 0, 0 again.

The manual says it should auto home to the left front, but instead it moves to the rear right. Brand new ender 5 plus ive been working on tracking down the cause of this noise for 2 weeks with support.. I am using skr 1.4 turbo with tmc2130 and my current y axis vref is 0.75v.

I believe the axis may be inverted? Ender 5 what is your y axis vref? What i have done so far: The higher the layer, the more it moves to the back. I just received my first 3d printer, the ender 5. I got my first printer a creality ender 5 pro yesterday. I did shutdown the printer without the axis being in home position (x: 0).i thought this should be no problem but after turning the printer on again the info screen showed the axis as 0, 0, 0 again.. I got my first printer a creality ender 5 pro yesterday.

Ender 5 what is your y axis vref? 0).i thought this should be no problem but after turning the printer on again the info screen showed the axis as 0, 0, 0 again. Ender 5 what is your y axis vref? I am using skr 1.4 turbo with tmc2130 and my current y axis vref is 0.75v.

And also had no problems. I just received my first 3d printer, the ender 5. Since 3 weeks i have installed the silent board v4.2.7. Ender 5 what is your y axis vref? I got my first printer a creality ender 5 pro yesterday. Posted by 1 year ago. The manual says it should auto home to the left front, but instead it moves to the rear right. 01.07.2020 · i am completely new to 3d printing. Standard (normal position) +5mm (for those who.

I did shutdown the printer without the axis being in home position (x: .. Standard (normal position) +5mm (for those who.

I got my first printer a creality ender 5 pro yesterday... I am going through solutions for a y axis layer shift on my prints and the only one left is adjusting the vref. I am using skr 1.4 turbo with tmc2130 and my current y axis vref is 0.75v. What i have done so far: The higher the layer, the more it moves to the back. When printing elements with about 4cm in the y axis i get a layer shifting... I got my first printer a creality ender 5 pro yesterday.

Brand new ender 5 plus ive been working on tracking down the cause of this noise for 2 weeks with support. 06.09.2021 · i have had an ender 5 for about 2 months, i have had no problems with it so far. And also had no problems. 0).i thought this should be no problem but after turning the printer on again the info screen showed the axis as 0, 0, 0 again. Can good people of reddit please advise what is their vref setting for the y axis stepper driver? What i have done so far: Standard (normal position) +5mm (for those who... Ender 5 what is your y axis vref?

And also had no problems. Ender 5 what is your y axis vref? Standard (normal position) +5mm (for those who. What i have done so far: The manual says it should auto home to the left front, but instead it moves to the rear right. Brand new ender 5 plus ive been working on tracking down the cause of this noise for 2 weeks with support... What i have done so far:

0).i thought this should be no problem but after turning the printer on again the info screen showed the axis as 0, 0, 0 again.. Since 3 weeks i have installed the silent board v4.2.7. Ender 5 what is your y axis vref? Standard (normal position) +5mm (for those who. The higher the layer, the more it moves to the back. I believe the axis may be inverted? I did shutdown the printer without the axis being in home position (x: Can good people of reddit please advise what is their vref setting for the y axis stepper driver? I got my first printer a creality ender 5 pro yesterday.. And also had no problems.

I believe the axis may be inverted? I got my first printer a creality ender 5 pro yesterday. And also had no problems. I just received my first 3d printer, the ender 5. I did shutdown the printer without the axis being in home position (x: The manual says it should auto home to the left front, but instead it moves to the rear right. Since 3 weeks i have installed the silent board v4.2.7. Posted by 1 year ago.. I did shutdown the printer without the axis being in home position (x:

Can good people of reddit please advise what is their vref setting for the y axis stepper driver?.. I just received my first 3d printer, the ender 5. 01.07.2020 · i am completely new to 3d printing. I believe the axis may be inverted? Ender 5 what is your y axis vref? Ender 5 what is your y axis vref? 06.09.2021 · i have had an ender 5 for about 2 months, i have had no problems with it so far.

The manual says it should auto home to the left front, but instead it moves to the rear right.. And also had no problems. What i have done so far: 06.09.2021 · i have had an ender 5 for about 2 months, i have had no problems with it so far. Can good people of reddit please advise what is their vref setting for the y axis stepper driver? Posted by 1 year ago. 26.04.2021 · service tutorial ender 5 pro y axis synchronous belt replacement I am going through solutions for a y axis layer shift on my prints and the only one left is adjusting the vref. 01.07.2020 · i am completely new to 3d printing. I believe the axis may be inverted?

0).i thought this should be no problem but after turning the printer on again the info screen showed the axis as 0, 0, 0 again. The manual says it should auto home to the left front, but instead it moves to the rear right. I am going through solutions for a y axis layer shift on my prints and the only one left is adjusting the vref. I did shutdown the printer without the axis being in home position (x: I got my first printer a creality ender 5 pro yesterday. I am using skr 1.4 turbo with tmc2130 and my current y axis vref is 0.75v. The higher the layer, the more it moves to the back. Ender 5 what is your y axis vref? 06.09.2021 · i have had an ender 5 for about 2 months, i have had no problems with it so far. Can good people of reddit please advise what is their vref setting for the y axis stepper driver? Since 3 weeks i have installed the silent board v4.2.7.. 01.07.2020 · i am completely new to 3d printing.

I am going through solutions for a y axis layer shift on my prints and the only one left is adjusting the vref.. I got my first printer a creality ender 5 pro yesterday. When printing elements with about 4cm in the y axis i get a layer shifting. 06.09.2021 · i have had an ender 5 for about 2 months, i have had no problems with it so far. Can good people of reddit please advise what is their vref setting for the y axis stepper driver? 0).i thought this should be no problem but after turning the printer on again the info screen showed the axis as 0, 0, 0 again. 26.04.2021 · service tutorial ender 5 pro y axis synchronous belt replacement I just received my first 3d printer, the ender 5. And also had no problems. The higher the layer, the more it moves to the back. I believe the axis may be inverted?. I am using skr 1.4 turbo with tmc2130 and my current y axis vref is 0.75v.

Since 3 weeks i have installed the silent board v4.2.7... Ender 5 what is your y axis vref? 0).i thought this should be no problem but after turning the printer on again the info screen showed the axis as 0, 0, 0 again. The higher the layer, the more it moves to the back. What i have done so far: I believe the axis may be inverted? Since 3 weeks i have installed the silent board v4.2.7. Ender 5 what is your y axis vref?. The manual says it should auto home to the left front, but instead it moves to the rear right.

I just received my first 3d printer, the ender 5... Brand new ender 5 plus ive been working on tracking down the cause of this noise for 2 weeks with support. Ender 5 what is your y axis vref? When printing elements with about 4cm in the y axis i get a layer shifting. 01.07.2020 · i am completely new to 3d printing. What i have done so far: Standard (normal position) +5mm (for those who. I am using skr 1.4 turbo with tmc2130 and my current y axis vref is 0.75v.. I did shutdown the printer without the axis being in home position (x:

I am using skr 1.4 turbo with tmc2130 and my current y axis vref is 0.75v. I am using skr 1.4 turbo with tmc2130 and my current y axis vref is 0.75v. Brand new ender 5 plus ive been working on tracking down the cause of this noise for 2 weeks with support.

Can good people of reddit please advise what is their vref setting for the y axis stepper driver?.. I did shutdown the printer without the axis being in home position (x: I got my first printer a creality ender 5 pro yesterday. 26.04.2021 · service tutorial ender 5 pro y axis synchronous belt replacement I just received my first 3d printer, the ender 5. Ender 5 what is your y axis vref? I believe the axis may be inverted? Since 3 weeks i have installed the silent board v4.2.7. 0).i thought this should be no problem but after turning the printer on again the info screen showed the axis as 0, 0, 0 again.. Posted by 1 year ago.

And also had no problems... I did shutdown the printer without the axis being in home position (x: Ender 5 what is your y axis vref? Ender 5 what is your y axis vref? I believe the axis may be inverted? I am using skr 1.4 turbo with tmc2130 and my current y axis vref is 0.75v. Can good people of reddit please advise what is their vref setting for the y axis stepper driver? Brand new ender 5 plus ive been working on tracking down the cause of this noise for 2 weeks with support. Standard (normal position) +5mm (for those who. I just received my first 3d printer, the ender 5. 0).i thought this should be no problem but after turning the printer on again the info screen showed the axis as 0, 0, 0 again.. 01.07.2020 · i am completely new to 3d printing.

0).i thought this should be no problem but after turning the printer on again the info screen showed the axis as 0, 0, 0 again. Since 3 weeks i have installed the silent board v4.2.7. I am using skr 1.4 turbo with tmc2130 and my current y axis vref is 0.75v. And also had no problems. 26.04.2021 · service tutorial ender 5 pro y axis synchronous belt replacement I got my first printer a creality ender 5 pro yesterday. 01.07.2020 · i am completely new to 3d printing. 0).i thought this should be no problem but after turning the printer on again the info screen showed the axis as 0, 0, 0 again. I just received my first 3d printer, the ender 5. Ender 5 what is your y axis vref? Posted by 1 year ago.

06.09.2021 · i have had an ender 5 for about 2 months, i have had no problems with it so far. I got my first printer a creality ender 5 pro yesterday. Posted by 1 year ago.

I got my first printer a creality ender 5 pro yesterday. Can good people of reddit please advise what is their vref setting for the y axis stepper driver? Posted by 1 year ago. And also had no problems. 01.07.2020 · i am completely new to 3d printing. The manual says it should auto home to the left front, but instead it moves to the rear right.. The higher the layer, the more it moves to the back.

I believe the axis may be inverted? 06.09.2021 · i have had an ender 5 for about 2 months, i have had no problems with it so far. Standard (normal position) +5mm (for those who. The manual says it should auto home to the left front, but instead it moves to the rear right. I just received my first 3d printer, the ender 5. Since 3 weeks i have installed the silent board v4.2.7. 01.07.2020 · i am completely new to 3d printing. What i have done so far: Brand new ender 5 plus ive been working on tracking down the cause of this noise for 2 weeks with support.

I did shutdown the printer without the axis being in home position (x: I got my first printer a creality ender 5 pro yesterday. Posted by 1 year ago.

Ender 5 what is your y axis vref? 0).i thought this should be no problem but after turning the printer on again the info screen showed the axis as 0, 0, 0 again. I got my first printer a creality ender 5 pro yesterday. Ender 5 what is your y axis vref? I am using skr 1.4 turbo with tmc2130 and my current y axis vref is 0.75v. 01.07.2020 · i am completely new to 3d printing. 26.04.2021 · service tutorial ender 5 pro y axis synchronous belt replacement 06.09.2021 · i have had an ender 5 for about 2 months, i have had no problems with it so far. Can good people of reddit please advise what is their vref setting for the y axis stepper driver? The higher the layer, the more it moves to the back. And also had no problems.. And also had no problems.

The higher the layer, the more it moves to the back.. What i have done so far: Ender 5 what is your y axis vref? Ender 5 what is your y axis vref? Since 3 weeks i have installed the silent board v4.2.7. I just received my first 3d printer, the ender 5. I am using skr 1.4 turbo with tmc2130 and my current y axis vref is 0.75v. Can good people of reddit please advise what is their vref setting for the y axis stepper driver? Posted by 1 year ago. The manual says it should auto home to the left front, but instead it moves to the rear right.

Posted by 1 year ago... . Ender 5 what is your y axis vref?

Ender 5 what is your y axis vref? 01.07.2020 · i am completely new to 3d printing. 26.04.2021 · service tutorial ender 5 pro y axis synchronous belt replacement Posted by 1 year ago. I just received my first 3d printer, the ender 5. I believe the axis may be inverted? Ender 5 what is your y axis vref? Can good people of reddit please advise what is their vref setting for the y axis stepper driver? And also had no problems. Since 3 weeks i have installed the silent board v4.2.7.. Standard (normal position) +5mm (for those who.

Since 3 weeks i have installed the silent board v4.2.7. I am going through solutions for a y axis layer shift on my prints and the only one left is adjusting the vref. Can good people of reddit please advise what is their vref setting for the y axis stepper driver? Since 3 weeks i have installed the silent board v4.2.7. When printing elements with about 4cm in the y axis i get a layer shifting. 26.04.2021 · service tutorial ender 5 pro y axis synchronous belt replacement Posted by 1 year ago.. 01.07.2020 · i am completely new to 3d printing.

I got my first printer a creality ender 5 pro yesterday.. . 26.04.2021 · service tutorial ender 5 pro y axis synchronous belt replacement

The manual says it should auto home to the left front, but instead it moves to the rear right... And also had no problems. Ender 5 what is your y axis vref? Posted by 1 year ago. Since 3 weeks i have installed the silent board v4.2.7. Ender 5 what is your y axis vref? 26.04.2021 · service tutorial ender 5 pro y axis synchronous belt replacement

0).i thought this should be no problem but after turning the printer on again the info screen showed the axis as 0, 0, 0 again. When printing elements with about 4cm in the y axis i get a layer shifting. Posted by 1 year ago. 06.09.2021 · i have had an ender 5 for about 2 months, i have had no problems with it so far. What i have done so far: I am using skr 1.4 turbo with tmc2130 and my current y axis vref is 0.75v... When printing elements with about 4cm in the y axis i get a layer shifting.

The higher the layer, the more it moves to the back. I got my first printer a creality ender 5 pro yesterday. Ender 5 what is your y axis vref?.. I got my first printer a creality ender 5 pro yesterday.

I am going through solutions for a y axis layer shift on my prints and the only one left is adjusting the vref.. . What i have done so far:

I am going through solutions for a y axis layer shift on my prints and the only one left is adjusting the vref... 26.04.2021 · service tutorial ender 5 pro y axis synchronous belt replacement Can good people of reddit please advise what is their vref setting for the y axis stepper driver? I believe the axis may be inverted? Ender 5 what is your y axis vref? What i have done so far: Brand new ender 5 plus ive been working on tracking down the cause of this noise for 2 weeks with support. Standard (normal position) +5mm (for those who. 06.09.2021 · i have had an ender 5 for about 2 months, i have had no problems with it so far. The manual says it should auto home to the left front, but instead it moves to the rear right. I just received my first 3d printer, the ender 5.. And also had no problems.

What i have done so far:. The higher the layer, the more it moves to the back. Brand new ender 5 plus ive been working on tracking down the cause of this noise for 2 weeks with support. When printing elements with about 4cm in the y axis i get a layer shifting.

Can good people of reddit please advise what is their vref setting for the y axis stepper driver?. 01.07.2020 · i am completely new to 3d printing. I believe the axis may be inverted? Ender 5 what is your y axis vref? Standard (normal position) +5mm (for those who. The manual says it should auto home to the left front, but instead it moves to the rear right. 26.04.2021 · service tutorial ender 5 pro y axis synchronous belt replacement I am using skr 1.4 turbo with tmc2130 and my current y axis vref is 0.75v. 06.09.2021 · i have had an ender 5 for about 2 months, i have had no problems with it so far.. I am using skr 1.4 turbo with tmc2130 and my current y axis vref is 0.75v.

Brand new ender 5 plus ive been working on tracking down the cause of this noise for 2 weeks with support. Since 3 weeks i have installed the silent board v4.2.7. I did shutdown the printer without the axis being in home position (x: 01.07.2020 · i am completely new to 3d printing. Brand new ender 5 plus ive been working on tracking down the cause of this noise for 2 weeks with support.. 0).i thought this should be no problem but after turning the printer on again the info screen showed the axis as 0, 0, 0 again.